Tungsten Carbide E-shoa - Ho Tepella Hoa Shoa 'me Sehlooho se batang se Shoa Setšoantšo se hlahang

Tungsten Carbide E-shoa - Ho Tepeta Hoa Shoa 'me Sehlooho se Cold se Shoele

Tlhaloso e Khutšoanyane:

Boemo bo phahameng ba ho hanyetsa le ho ba thata:
- E fana ka bophelo bo tšoarellang nako e telele le bophelo bo tšepahalang.

Ho nepahala ho phahameng le botsitso ba dimensional:
- Fumana litlhoko tse nepahetseng.

Botsitso bo botle ba mocheso:
- E loketse ts'ebetso e phahameng ea mocheso le lits'ebetso tse chesang tsa litempe.

Corrosion resistance:
- Boloka boleng ba bokaholimo le ts'ebetso.

Likhetho tse ngata tsa hlobo li fumaneha:
- Ho hatakela hlobo, ho taka hlobo, hlobo ea extrusion, hlobo e batang ea lihlooho.

Tsebo e matla ea ho itlhophisa:
- Kopana le litlhoko tse khethehileng tsa ts'ebetso le litlhoko tsa moralo.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso

"JinTai" ea shoa 'me hlooho e batang ea shoa

Likaroloana:
Khetha kereiti e nepahetseng ho latela tšebeliso ea 'nete ea moreki le lisebelisoa tse ntseng li sebetsoa.Ka limaraka tse fapaneng tsa litempe tsa tšepe tsa tungsten, e ka fihlela litlhoko tsa lits'ebetso tse fapaneng, litlhaloso tse felletseng, litekanyo tse hlakileng tse se nang letho, ea fokotsa molumo oa ts'ebetso, le ho ntlafatsa ts'ebetso le ts'ebetso e ntle ea litšenyehelo.

Tshebetso:
U sebelisa 99.95% ea boleng bo phahameng ba tungsten carbide powder le cobalt, ho thatafala ha hlooho e batang ho shoa ho fihla ka holimo ho HRA88, matla a ho khumama a feta 2400, ka thata e khubelu e thata, ho hanyetsa ho apara ho phahameng, modulus e phahameng ea elastic, matla a ho kobeha, le ho hanyetsa tšusumetso e tšoarellang. .

Lisebelisoa:
E loketse bakeng sa lihlooho tse batang le tse batang tsa likarolo tse tloaelehileng tse entsoeng ka koporo, aluminium, tšepe, lisebelisoa tsa tšepe tsa alloy, tse kang li-screw, li-rivets, joalo-joalo. shoa, molamu oa phokotso oa shoa, joalo-joalo.

Setempe E Shoa Cold Heading E-shoa

Ho hanyetsa kutu ho bohlokoa ha ho tluoa tabeng ea ho boloka boleng ba bokaholimo le ts'ebetso e tšoarellang nako e telele.Tungsten carbide ea rona e shoa e etselitsoe ho hanela kutu ka nepo.Mefuta ena e hanyetsana le kutu 'me e tla boloka bokaholimo ba hau bo le maemong a hloekileng, ho netefatsa pheletso e phethahetseng nako le nako.U ka tšepa liforomo tsa rona hore li tla ema tekong ea nako le ho fana ka liphetho tse holimo ka ts'ebeliso e 'ngoe le e' ngoe.

Ebang ke moralo o ikhethileng, boholo bo ikhethang kapa litlhoko tse ikhethileng tsa ts'ebetso, sehlopha sa rona sa litsebi se ikemiselitse ho fana ka liforomo tse fetang tebello ea hau.

Tungsten Carbide Molds bakeng sa Impeccable Precision-details4

Li-molds tsa Tungsten Carbide bakeng sa ho nepahala-lintlha-lintlha7

Hlahisa bokhoni bo nepahetseng ba Tungsten Carbide Molds!Joaloka setsebi sa khoebo ea marang-rang se tšelang moeli, u fihlile sebakeng se nepahetseng bakeng sa Molds ea Tungsten Carbide ea boemo bo holimo e ipabolang lits'ebetsong tse fapaneng tse fapaneng, e netefatsang ho nepahala le ho tšoarella ho ke keng ha bapisoa.

E entsoe ka boqhetseke ka boitseanape bo ke keng ba bapisoa, Tungsten Carbide Molds ea rona e bonts'a boima bo makatsang le ho se mamelle, e ba etsa khetho ea ho qetela bakeng sa mesebetsi ea ho bopa liindasteri tse kang tsa likoloi, tsa elektroniki le tse ling.Tšepa liforomo tsena ho fana ka litholoana tse se nang sekoli le nako e telele ea bophelo, ho fetola mekhoa ea hau ea ho bopa.

Ka ntle ho boima ba bona bo ikhethang, Tungsten Carbide Molds ea rona e bontša khanyetso e tsotehang ea mocheso, e tiisang ts'ebetso e tsitsitseng esita le tlas'a maemo a phahameng a mocheso.Fumana bokhoni ba bona ba ho boloka libopeho tse nepahetseng le ho ts'epahala, ho u fa matla a ho ntlafatsa tlhahiso le ho fokotsa litšenyehelo tsa tlhahiso.

Ho JINTAI, re motlotlo haholo ka ho fana ka lihlahisoa tse fetang litekanyetso tsa boleng bo holimo.Mould e 'ngoe le e' ngoe ea Tungsten Carbide e etsa liteko tse matla, e netefatsa ho ts'oana le bokhabane, e u nolofalletsang ho fihlela litholoana tse ntle mererong ea hau ea ho bopa.

Amohela ts'ebetso e ntle le katleho ea litšenyehelo ka Tungsten Carbide Molds ea rona ea pele, 'me u fumane monyetla oa tlholisano indastering ea hau.Sebelisana le rona kajeno ho bona ts'ebetso e ke keng ea bapisoa le hlobo e tlisoang ke ts'ebetso ea hau ea ho bopa.

Khetha JINTAI bakeng sa Tungsten Carbide Molds e tšepahalang, e sebetsang hantle haholo, 'me u bone bokhoni ba bona ba 'nete ba ho phahamisetsa khoebo ea hau holimo.Beha odara ea hau hona joale 'me u sebelise matla a litharollo tsa rona tsa maemo a holimo.

Li-molds tsa Tungsten Carbide bakeng sa ho nepahala-lintlha-lintlha5

Lenane la Kereiti

Kereiti	Khoutu ea ISO	Thepa ea 'Mechanical (≥)			Kopo
Kereiti	Khoutu ea ISO	Botenya g/cm3	Ho thatafala(HRA)	TRS N/mm2	Kopo
YG3X	K05	15.0-15.4	≥91.5	≥1180	E loketse bakeng sa machining e nepahetseng ea tšepe e entsoeng ka tšepe le litšepe tse se nang ferrous.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	E loketse bakeng sa ho sebetsa ka mokhoa o nepahetseng le ho qeta litšepe tse entsoeng ka tšepe le tse se nang ferrous, hammoho le ho sebetsana le tšepe ea manganese le tšepe e tingoeng.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	E loketse bakeng sa ho qeta le ho etsa machining a tšepe a tšepe le lisebelisoa tse bobebe, hape e ka sebelisoa bakeng sa machining a mabe a tšepe ea tšepe le tšepe e tlase ea alloy.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	E loketse ho cheka mafika a rotary le likotoana tsa ho cheka mafika.
YG11C	K40	14.0-14.4	≥86.5	≥2060	E loketse ho kenya likotoana tsa meno tse nang le sebopeho sa chisel kapa tse kholo bakeng sa mechini e boima ea ho cheka mafika ho sebetsana le mafika a thata.
YG15	K30	13.9-14.2	≥86.5	≥2020	E loketse tlhahlobo e tsitsitseng ea litšepe le liphaephe tsa tšepe tlas'a litekanyetso tse phahameng tsa khatello.
YG20	K30	13.4-13.8	≥85	≥2450	E loketse ho etsa stamping die.
YG20C	K40	13.4-13.8	≥82	≥2260	E loketse ho etsa litempe tse batang le ho hatella ho batang bakeng sa liindasteri tse kang likarolo tse tloaelehileng, li-bearings, lisebelisoa, joalo-joalo.
YW1	M10	12.7-13.5	≥91.5	≥1180	E loketse bakeng sa machining e nepahetseng le ho qeta halofo ea tšepe e sa hloekang le tšepe e akaretsang ea alloy.
YW2	M20	12.5-13.2	≥90.5	≥1350	E loketse ho qeta halofo ea tšepe e sa hloekang le tšepe e tlase ea alloy.
YS8	M05	13.9-14.2	≥92.5	≥1620	E loketse bakeng sa ho sebetsa ka mokhoa o nepahetseng oa li-alloys tse thehiloeng ho tšepe tse thehiloeng ho nickel le litšepe tse matla haholo.
YT5	P30	12.5-13.2	≥89.5	≥1430	E loketse ho itšeha ka thata-thata ea tšepe le tšepe ea tšepe.
YT15	P10	11.1-11.6	≥91	≥1180	E loketse bakeng sa machining e nepahetseng le ho qeta halofo ea tšepe le tšepe ea tšepe.
YT14	P20	11.2-11.8	≥90.5	≥1270	E loketse bakeng sa ho sebetsa ka mokhoa o nepahetseng le ho qeta litšepe le tšepe e entsoeng ka tšepe, ka tekanyo ea phepo e itekanetseng.YS25 e etselitsoe ka ho khetheha ts'ebetso ea ho sila ka tšepe le tšepe.
YC45	P40/P50	12.5-12,9	≥90	≥2000	E loketse lisebelisoa tsa ho itšeha tse boima, e fanang ka litholoana tse ntle haholo mabapi le ho phethoha ho hoholo ha li-castings le litšepe tse fapaneng.
YK20	K20	14.3-14.6	≥86	≥2250	E loketse ho kenya likotoana tsa ho cheka mafika a rotary le ho cheka ka mafika a thata le a batlang a le thata.